Grease fitting on steering cable

[S Lightly Salty]

I have been trying (unsuccessfully) to grease the steering cable. The cable is newer but was installed with the grease fitting facing the stern. I’ve tried with a universal fitting as well as some complex boat yoga. No luck. Anyone have a similar experience with better results? Is it an odd size?

 

[Espos4]

I’m not sure if it’s an odd size, but if not, there are 90° zerk fittings and well as 90° fittings for the grease gun. You may have to try one of those options.

 

[The Bill Collector]

https://www.amazon.com/Lumax-LX-140...=2025&creative=165953&creativeASIN=B000MS5T42

 

[S Lightly Salty]

I’m not sure if it’s an odd size, but if not, there are 90° zerk fittings and well as 90° fittings for the grease gun. You may have to try one of those options.

Thank you

 

[S Lightly Salty]

https://www.amazon.com/Lumax-LX-140...=2025&creative=165953&creativeASIN=B000MS5T42

Thank you. I wonder what I was typing into the search bar to make sure that didn’t come up....