Help me identify components?

Robillard

New Member
Jun 22, 2012
43
Santa Cruz, CA
Boat Info
330 Sundancer 1998
Engines
Twin 454 Mercruisers, V-drives
Had a peek behind the dash of my 1998 Sundancer 330, and found several components that I could not identify... Wondering if anyone might help me figure out what they are?

Here are pictures:
<https://www.icloud.com/photostream/#A35oqs3qmR2fO>

(I tried posting the pictures inline, but apparently you have to be a sponsor to have enough quota to do that...)

Thanks in advance!
 
The big round hockey puck with all the wires coming from it is for the sync gauge.

The thing with the two big red cables on it is a solenoid. Probably the emergency start solenoid.
 
The big round hockey puck with all the wires coming from it is for the sync gauge.

Ah, thanks. Seems a bit overkill in the size department for something that is pretty basic in operation (one would imagine).

The thing with the two big red cables on it is a solenoid. Probably the emergency start solenoid.

Cool, that makes sense, thanks for the reply!

Anyone else care to speculate on the "Terminal Mod[...] SeaRay IPX System [...]" unit?

Or the other, label-less-but-wire-laden hockey puck?
 
Anyone else care to speculate on the "Terminal Mod[...] SeaRay IPX System [...]" unit?

After a bit of searching, it seems this is likely to be the systems monitor controller...

So we're left with the other, label-less-but-wire-laden hockey puck... Anyone care to hazard a guess?
 
The IPX could be part of the systems monitor... probably drives a display on the dash. The other no label device with the hole in the middle could be the audible alarm for over-temp, oil pressure, and such.
 

Forum statistics

Threads
113,253
Messages
1,429,375
Members
61,133
Latest member
Willbeckett
Back
Top