help transducer install 95 330 da

[larrytbull]

:smt089Help
trying to find a way to get transducer wire fished to dash panel on a 95 330 da. spent 2 hours trying to find a wayto get cable through to dash. WHere are the access panels

:smt101

 

[SeaHarley]

I took off the access side panel next to my helm seat.
Then I followed the throttle cables down into bilge area above the starboard gas tank.
Tight..........

 

[larrytbull]

is that the panel with the cup holder? I tried removing the speaker and that did not help

 

[SeaHarley]

On mine, which is a 310DA, it is the one with the cup holder.
There are little 3/8" white plug covers that are over the screws.
And if it has not been removed yet, it may still be caulked in place around the outside.
That's why it doesn't look like it comes off.
But it does.
Remove the screws, cut the caulk, use a putty knife, pry out and off.
That's how you get access to all the cables, wires, speakers,VHF, etc. back in there.

Good luck

Lee