Boca_Vincent
Active Member
A few weeks back I noticed the the tabs were not evenly positioned when I started up the boat and the port side would not adjust fully to the up position (still had about a quarter of the way left). I saw the online video on how to calibrate, which I tried. Now, all I get is the alternating (left/right) flashing. I have tried the calibration process a few times, and the tabs seem to be moving fine while in that mode. Not sure where to go from here.
https://imgur.com/gallery/st6X95X
Thanks, Vince
https://imgur.com/gallery/st6X95X
Thanks, Vince