How to remove bolster 270 1998

[danh]

Hallo, i`m from Sweden and have a Sea Ray 270 Da 1998, i want to remove the bolster forward lounge and bolster port side so i can make an upholstery? I dont know the name, but it seems impossible to remove it.
I guess there are nuts on the inside but i dont know how to get to them without distroing the entire inside.
Dan

 

[mcosner]

Hello Danh:

I am having the same problem. Did you ever figure out how to remove the bolster?
THanks Mike

 

[mwph]

On my boat, 1998 250DA, the seat itself is simply attached with velcro. Two wide strips which are very strong, but just velcro.

The lounge back is screwed in from inside the cabin, but you need not tear anything up to get to it. The panel above the mid berth entry is held in by small screws covered with a plastic "button". Remove that panel & the 4 screws, one in each corner, that hold the lounge back can be found.

The padded rest that runs along the port side can be accessed once you remove the interior panel and the port side cockpit speaker.

Hope this helps.

ps...........Welcome to CSR!

 

[mcosner]

Thanks, that helps immensely. the interior panel, i figured, had to come out but I couldn't see the buttons or was not looking for them. I am sure it is the same system.

Mike