I just hate the cupholders...

[Knott Today]

Bought the Boat a couple weeks ago...
Just couldn't stand those triple ring things...
Especially since they don't hold my small Yetti 10oz

This is my Template... out of PVC for now...
but will be buying King Starboard to make the final one...
Will go beside the sliding stairs...

Still thinking what I want to do to replace the ones near the sink...

 

[MonacoMike]

Nice job.

MM

 

[Chris-380]

Very nice work!

I have a few of this style on my boat, works good, but doesn't hold the gentlemans
https://www.amazon.com/dp/B0007TR53...colid=T64R8YVRV84I&psc=1&ref_=lv_ov_lig_dp_it

 

[Knott Today]

Yeah those are the ones I can't stand... same steel ring things... they don't hold the small Yeti's... least not he ones on my boat

 

[Chris-380]

Yeah those are the ones I can't stand... same steel ring things... they don't hold the small Yeti's... least not he ones on my boat

works for my yeti can coolies, not sure on the lowball, haven't tried that. my era of 380 came with 3 cup holders (total), one to the right of the helm, in the wall. The other 2 is way left of the help by the companion seat. not a good system, imo

So these work great, held down with suction cups and can move around as I like. The PO had bought a double and triple and left with the boat. I bought a single that sits on the dash above the steering wheel... I really like your set up, just don't have what it takes in time and effort to build it

 

[Henry Boyd]

Nice design. You know you can make that out of mahogany for probably the same or less cost than Starboard.

H

 

[Knott Today]

Yes.. on Mahogany but I would think it would be heavier... Here is a pic of it in place...

 

[Phasma]

That is a beautiful piece of art. Kind of brings a tear to my eye especial how nicely you treated the bottle of Gentlemen Jack...

 

[Chris-380]

Yes.. on Mahogany but I would think it would be heavier... Here is a pic of it in place...

Looks good!

 

[Chris-380]

Yeah those are the ones I can't stand... same steel ring things... they don't hold the small Yeti's... least not he ones on my boat

Just to follow up on this, my yeti rambler lowball fits in my factory and also the ones I posted above.

 

[play dough]

I'd put a break in the diameters that hold the glasses in case you want to set a handled cup in that spot...unless this is a single purpose/use appliance. Stainless tubing in place of the block offset supports and definitely hitting all the top edges with a quarter round bit would dress it up a little as well. Just a couple thoughts I had after looking at the prototype.