sdl22
New Member
Gents,,
Was running along fine today. Stopped to top off the fuel and grab some lunch at a marina. Got back in boat and she started fine. We got under way and I noticed none of my gauges were working. I have a 350Mag MPI w/ the mercruiser smartcraft system. Only gauge that worked was my tach. My LED display screen was stuck in depth mode, and was froze. I stopped. turned engine off, then recranked. Still no gauges. My oil psi,water temp, fuel, trim level, and so on did not read. I noticed when I recranked all the gauges went to 0 but never moved again. Unfortunatly I was 15 miles from my boat ramp. Made it back w/ no issues, and got it on the drive way. I flushed engine w/ no problem, but still no gauges. I looked under the dash for a loose wire and also looked at all my circuit breakers. Any ideas or hints on this one... I will be taking in for other warranty work later this week, buit would just like to have an idea whats wrong...
Thanks
Was running along fine today. Stopped to top off the fuel and grab some lunch at a marina. Got back in boat and she started fine. We got under way and I noticed none of my gauges were working. I have a 350Mag MPI w/ the mercruiser smartcraft system. Only gauge that worked was my tach. My LED display screen was stuck in depth mode, and was froze. I stopped. turned engine off, then recranked. Still no gauges. My oil psi,water temp, fuel, trim level, and so on did not read. I noticed when I recranked all the gauges went to 0 but never moved again. Unfortunatly I was 15 miles from my boat ramp. Made it back w/ no issues, and got it on the drive way. I flushed engine w/ no problem, but still no gauges. I looked under the dash for a loose wire and also looked at all my circuit breakers. Any ideas or hints on this one... I will be taking in for other warranty work later this week, buit would just like to have an idea whats wrong...
Thanks