1132MM
Member
- Aug 1, 2010
- 187
- Boat Info
- 2004 Sea Ray 280 Sundancer
- Engines
- Twin 4.3 Liter Mercruiser w/Alpha One Gen 2 Drives
What is the best way to bleed the air out of the trim pump and lines. I've read two different ways that are recommended. One is to fill the trim pump reservoir and trim the drive up and down until the air is out, second was to take the up lines off and trim the drive up and then do the same with the trim line connector under the gimbal. Any suuestions?