- Nov 26, 2006
- 7,628
- Boat Info
- 2008 44 Sedan Bridge
- Engines
- Cummins QSC-500's
Straight Drives
My port bilge blower was not working, and the stbd was loud, so I replaced them both. The port still didn't work, so I started to trouble shoot. I found a popped CB on the forward wall of the engine room. I reset it. The next day, it was popped and it wouldn't reset.
After I run a new wire to the blower, I'll need to replace the 7 amp CB. It's one of those which is a white pin with a clear, rubber cover over it. The CB box has 3-slotted screws holding it together - not standard, and not phillips, and not star shaped.
Anyone know how I can replace it?
After I run a new wire to the blower, I'll need to replace the 7 amp CB. It's one of those which is a white pin with a clear, rubber cover over it. The CB box has 3-slotted screws holding it together - not standard, and not phillips, and not star shaped.
Anyone know how I can replace it?