Portlight screens

[SeaRaycuse]

Im trying to replace the portlight screens on a 2004 260 Sundancer. Im afraid to pull the gasket out without knowing how the repair/replacement will go. I was hoping to just replace screens with new material for lowes. Any advise???

 

[dpmulvey]

What screws? Are you trying to fit these from the outside?

 

[Rssll45]

You can carefully remove the gasket from the inside and replace the screen material, however, Sea Ray has a part (sorry I don't have the number) you can order that is a new gasket with a framed screen that fits inside it. The gasket has a pull-off strip that exposes adhesive, so you simply sck I in place.

 

[jpl2407]

Pompanette/ Bomar are the OEM I believe, I replaced the screens on my 250 last year. Their website is http://www.pompanette.com/home the part number for the 95 250 is P100-04-RETRO, I am unsure if this is the same part you would need, came with the gasket included. $25 per screen, and it was a real pita removing the old gasket and residue.

 

[Bob & Sue]

Here's the assembly drawing to install the new style gasket & screen from Pompantte.

 

[alwhite00]

I just glued mine in like factory with 3M weatherstrip adhesive and shut the window till it was set - Works great. I used a plastic molding removal tool to get the gasket out without tearing it.

 

[Molson]

For reference, for a 97 330DA the Part number is:

959288 PORTLIGHT, SCREEN & GASKET (BOMAR)