johnb
New Member
- Sep 21, 2007
- 32
- Boat Info
- 220 Sundeck 2006
- Engines
- Mercruiser 5.0L MPI w/ Bravo III Drive
The Merc manual states to mix up 5 gallons of gas, 2 quarts of 2-cycle outboard oil and 5 ounces of fuel stabilizer. Then it instructs to:
"Close the fuel shut off valve, if equipped. Disconnect and plug fuel inlet fitting if not equipped with a shut off valve. Then connect the remote fuel tank (with mixture above) to the fuel inlet fitting."
Then you're supposed to run the engine on this mixture. Well, I have a standard 5.0L MPI engine on my '06 220 Sundeck. I'm not familiar with this technique of fogging at all. I only know the spray foggers.
Anybody know where this fuel shut off or fuel inlet fitting is located? Do I need a special type of "remote fuel tank" for this procedure? Has anybody actually done this? Easy? Hard? How many bananas?
"Close the fuel shut off valve, if equipped. Disconnect and plug fuel inlet fitting if not equipped with a shut off valve. Then connect the remote fuel tank (with mixture above) to the fuel inlet fitting."
Then you're supposed to run the engine on this mixture. Well, I have a standard 5.0L MPI engine on my '06 220 Sundeck. I'm not familiar with this technique of fogging at all. I only know the spray foggers.
Anybody know where this fuel shut off or fuel inlet fitting is located? Do I need a special type of "remote fuel tank" for this procedure? Has anybody actually done this? Easy? Hard? How many bananas?