wrwisconsinsnowbird
New Member
- May 19, 2008
- 2
Hi,
I'm a newbie to Club Sea Ray and also a newbie to attempting a little fiber glass/gel touch up on a few nicks in my 1998 BR185.
I filled in a couplf of chips down on the bottom of the transom and the Gel Coat Paste Artic White I purchased from a sEa Ray dealer worked great with a little sanding. When I attempted to patch a chip on the upper driver's side of my boat near the gun whale I sanded the area with a 200 grit sand paper and water and a black streak appeared. The patch is glassy smooth with no rough spots but I'm afraid if I keep sanding more black will appear.The temps here in Wisconsin are only 50 in the day time and 30's at night,is this a problem? Any advice is appreciated.
I'm a newbie to Club Sea Ray and also a newbie to attempting a little fiber glass/gel touch up on a few nicks in my 1998 BR185.
I filled in a couplf of chips down on the bottom of the transom and the Gel Coat Paste Artic White I purchased from a sEa Ray dealer worked great with a little sanding. When I attempted to patch a chip on the upper driver's side of my boat near the gun whale I sanded the area with a 200 grit sand paper and water and a black streak appeared. The patch is glassy smooth with no rough spots but I'm afraid if I keep sanding more black will appear.The temps here in Wisconsin are only 50 in the day time and 30's at night,is this a problem? Any advice is appreciated.