sea Temp readout

[Sea buzz]

sea temp readout on 06 340 sundancer not working. Anyone have any ideas?

 

[yv1]

What's is the problem? Do you get wrong temp reading like -70 or no reading at all like "--"? Most common problem is that the Airmar transducer is about to go? Very some you'll lose deep reading too. The transducer is in front of the starboard engine. It's connect to the engine wire harness. It reads sea temp and water deep.

 

[Sea buzz]

What's is the problem? Do you get wrong temp reading like -70 or no reading at all like "--"? Most common problem is that the Airmar transducer is about to go? Very some you'll lose deep reading too. The transducer is in front of the starboard engine. It's connect to the engine wire harness. It reads sea temp and water deep.

Reads 100 degrees

 

[Sea buzz]

Can this be changed in the water?

 

[yv1]

It looks like the you need a new transducer. It can be changed with the boat on the water. They are about $350 new. Make sure to get the 0 degree keel angle. I bought once a 12 degree. It works but not accurate.

 

[Sea buzz]

It looks like the you need a new transducer. It can be changed with the boat on the water. They are about $350 new. Make sure to get the 0 degree keel angle. I bought once a 12 degree. It works but not accurate.

Thanks