Thank you in advance for your answers.
I have a 1991 Sea Ray 225 BR. 5.7 LTR engine. Engine serial number is 0D510869. It has a Alpha lower unit. I've have the boat for 8 years. I bought it with 285 hours. I has 525 hours now.
Lately I have only been able to get 3, 200 RPM's out of her. The WOT is supposed to be 4,600.
I thought may be the prop hub was slipping so I replacede it with a new RBX. The prop is 14.5 x 17. I got it up to 3,400 RPM's but not 4,600. I decided to look at the ignition system and the first plug I pulled was cracked. I've pulled three more until it got to dark. I've replace 4 plugs and will replace the rest.
I'm going to replace the distributor cap, rotor and plug wires. Should I replace the ignition sensor too?
I do not have tons of money otherwise I would replace with electronic ignition. Unless anyone knows where I can get one for a little over $100.
I have a 1991 Sea Ray 225 BR. 5.7 LTR engine. Engine serial number is 0D510869. It has a Alpha lower unit. I've have the boat for 8 years. I bought it with 285 hours. I has 525 hours now.
Lately I have only been able to get 3, 200 RPM's out of her. The WOT is supposed to be 4,600.
I thought may be the prop hub was slipping so I replacede it with a new RBX. The prop is 14.5 x 17. I got it up to 3,400 RPM's but not 4,600. I decided to look at the ignition system and the first plug I pulled was cracked. I've pulled three more until it got to dark. I've replace 4 plugs and will replace the rest.
I'm going to replace the distributor cap, rotor and plug wires. Should I replace the ignition sensor too?
I do not have tons of money otherwise I would replace with electronic ignition. Unless anyone knows where I can get one for a little over $100.
