HUMPH
Well-Known Member
- Nov 4, 2009
- 7,618
- Boat Info
- 2003 410DA
2009 Walker Bay 13’
- Engines
- CAT 3126TA's 350HP/
50HP Honda
So, we were heading out of a marina we spent the holiday at this morning and I noticed that my gauges were not reading proper voltage. They were bouncing around quite a lot reading down to 6 or 8 volts then up to 13 volts or so. Both were having this issue but the port side much worse. The outside temperature was in the high 40's and the wat temp was 43.5 degrees. After the engines started warming up a bit the gauges both read a steady 13+ volts. What would cause is?