Starting Issues

[JPringle]

2006 340 Port engine will not turn over. Happened all of the sudden. Checked the switch at the helm and it’s good. Batteries are charged and new starter installed. Still nothing. I get powered up to the gauges, but no start alarm when energized. New 90 amp breaker and all wires tight. Thoughts? Thank you!

 

[superwa]

Did it work after you installed the new starter? Could be a lemon? And making sure you are on neutral. Sometimes it’s the silly things

 

[JPringle]

No, no difference. Still won’t turn over, no sound, no cranking, nothing!

 

[liv2ryde100]

No, no difference. Still won’t turn over, no sound, no cranking, nothing!

U don’t even hear the fuel pump kick on?

 

[Scott215]

You can get a bad starter right out of the box, get a multi meter and check wires at starter

 

[Espos4]

Jump the solenoid and see if it cranks.

 

[JPringle]

Thank you all for your help. When I flip the switch, I don’t get any power to the gauges or fuel pump, etc. I jumped the solenoid and it spins. At the base of the 90amp fuse, I get power. However, at the top, nothing.

 

[liv2ryde100]

I’m assuming the key is turned on and the breaker for engines is also on correct?

 

[JPringle]

I’m assuming the key is turned on and the breaker for engines is also on correct?

 

[JPringle]

Yes

[/QUOTE

Yes

 

[liv2ryde100]

Yes

Very odd, u have no power to starter, or fuel pump. Must be a blown fuse somewhere

 

[scoflaw]

Thank you all for your help. When I flip the switch, I don’t get any power to the gauges or fuel pump, etc. I jumped the solenoid and it spins. At the base of the 90amp fuse, I get power. However, at the top, nothing.

Last sentence says your 90 amp fuse is not passing power?

 

[JPringle]

That was exactly the problem. New fuse solved the problem. I thank you all for your help!!