Swim ladder

[BobbyQ]

Thank you. I will call them tomorrow.

 

[JimG]

Just cut one out of a piece of tubing... If you don't have any tubing laying around, get it from McMaster Carr.

 

[Lazy Daze]

I was just going to mention the same thing, Jim. Mcmaster is a great place to look for things like this. I would say, though, it's still worth a call to GG as they are generally very accomodating in things like this - or, at least, that's been my perosonal experience.

 

[BobbyQ]

They opened with "no retail sales for now," but they sent me over to Engineering after a quick conversation, and I left a voicemail. I will look into Jim McMaster; I need the specs on the part. I can also cut some pipe as well, but I don't know if this is stainless or aluminum. Thank you again for the help.

 

[Lazy Daze]

In the pics, it looks like SS. Was the collar you dropped the same as the one you have there in your pics? If worse comes to worse, you can figure out the sizing based on the bolt that goes through it, where it fits and how much space you need to take up with the collar.

 

[BobbyQ]

Yes, all four were shiny and clean after my scrub down. I need to stop overdoing things. LOL, I can take it to Home Depot and use their screw sizing tool on the shelf. Thank you