CliffA
Well-Known Member
- Dec 29, 2009
- 4,712
- Boat Info
- 2001 Sea Ray 340DA
Name: 'Happy Place'
4.5kW West. Generator
Purchased Nov. 2014
Fresh Water Use
- Engines
- Twin Merc. 6.2L (MPI)
640 hp (Total)
Raw Water Cooled
V-Drive Transmissions
i plan on installing a new GPS in my 340 this WE which will require me to enlarge the existing GPS mounting hole in the dash....i will use 1/4" black starboard as a mounting plate to cover the existing dash hole....does anyone know the approximate thickness of the dash on a 2001 340DA?....i want to buy all the needed hardware such as SS bolts and washers before i go to the boat to save some time....the nearest Lowes from the boat is several miles away and traffic can be heavy so a trip there can take up well over an hour...i would rather spend that hour working on projects instead of fighting traffic....
i suppose i could just buy 2" bolts to be safe but i am not sure if this length of bolt would hit anything behind the dash....i'd rather buy properly sized bolts....
thanks...
cliff
i suppose i could just buy 2" bolts to be safe but i am not sure if this length of bolt would hit anything behind the dash....i'd rather buy properly sized bolts....
thanks...
cliff