Chris-380
Well-Known Member
Looking for advise/experience with adding garmin tank sensors to nmea2k network
trying to get a more accurate reading of fuel level. Right now I have fox marine gateways (mefi-3) on my 7.4 horizons that communicate with my garmin 4210 mfd. I like the fuel burn and tank total better than without, but looking to get a something to track the genny use also. Curious if a flow meter on that fuel line would be able to account for that. Would something like this on work?
https://buy.garmin.com/en-US/US/p/11561
also thinking, maybe these would be nice to add for tank level, if it would help at all. https://buy.garmin.com/en-US/US/p/35608#accessories
Any ideas on how to track genny fuel burn and adding it to my system is appreciated
Thanks in advance
trying to get a more accurate reading of fuel level. Right now I have fox marine gateways (mefi-3) on my 7.4 horizons that communicate with my garmin 4210 mfd. I like the fuel burn and tank total better than without, but looking to get a something to track the genny use also. Curious if a flow meter on that fuel line would be able to account for that. Would something like this on work?
https://buy.garmin.com/en-US/US/p/11561
also thinking, maybe these would be nice to add for tank level, if it would help at all. https://buy.garmin.com/en-US/US/p/35608#accessories
Any ideas on how to track genny fuel burn and adding it to my system is appreciated
Thanks in advance