bbwhitejr
Well-Known Member
Update: Adjusted rear bunks in 3/4" each and bunks sit perfect to the inside of the strakes totally centered. I am used to the front guide bunks centering the boat before it starts to rest on the rear bunks. This is not my case with this boat/trailer set up maybe due to a shallow ramp? I did not back the trailer as far back yesterday. Powered it on about 3/4 of the way and then winched it the rest. It did center perfect doing it this way. Dennis brought up a point that I am very intrigued by-moving the bunks outward to position them to the outside of the strakes. I think I have enough distance between the chines and the trailer fenders to do this, but have some measurements to make before I actually attempt this. What would be a minimum acceptable distance between the trailer fenders and the chines? All plan to make my guides rotate. Currently they have a rivet in the bottom of each one. I think I can simply get rid of the rivet, remove the PVC pipe and see what I have to work with. Thanks to all.