Absolutely-Knot
New Member
- Aug 21, 2023
- 6
- Boat Info
- 2007 Sea Ray 52 Sedan Bridge
- Engines
- 2 - Cummins QSM-11
Hello all, ive searxhed and read most all threads on rhis topic and much has helped. I have an issue thatbis cutting my arse. I have two vacuflush systems on my 2007 52 Sedan Bridge. Recently fixed the starboard side with yalls help.
The port side system was working in September but revently stopped working. I found the plunger broken. Took the entire unitnout and put all new duckbills gaskets and new plunger in. Wouldnt pull a vacuum. Took the entire unitnout again and replaced all the new parta mentioned above with new parts. Still wont pull a vacuum. Pumpnjust runs and runs. Rhe toilet holds water so that sealnisnt leaking. All the duckbills are in properly. The lines are not clogged. I have spent so many hours troubleahooting this, it is driving me mad.
Anynideas guys/gals? Im about ready to replace with macerator toilets.
Thanks
Captain Rob
The port side system was working in September but revently stopped working. I found the plunger broken. Took the entire unitnout and put all new duckbills gaskets and new plunger in. Wouldnt pull a vacuum. Took the entire unitnout again and replaced all the new parta mentioned above with new parts. Still wont pull a vacuum. Pumpnjust runs and runs. Rhe toilet holds water so that sealnisnt leaking. All the duckbills are in properly. The lines are not clogged. I have spent so many hours troubleahooting this, it is driving me mad.
Anynideas guys/gals? Im about ready to replace with macerator toilets.
Thanks
Captain Rob