Vessel view

[srl]

Before I started the boat I saw a triangle with yellow boarder with an asterisk inside in the top left coroner of the display. I pressed the info button & it said "engine 2 sensor" . Does anyone know what this means & how to fix it? Which engine is #2? Boat ran normally & all gauges read normally.

 

[Tman]

You should post a bit more details surrounding the equipment involved...boat and engine types/configuration and vessel view version at a minimum.

Absent that, you can go into settings and recalibrate sensors....through settings, you can also determine which engine is the #2.


Sent from my iPad using Tapatalk HD

 

[srl]

I believe my info motors drives is at the top of the post. Finally found a helpful guy at Mercury to tell me how to get into the info on the sensor - it's the pitot sensor. I don't use pitot sensor for anything, GPS feeds the speedometer. Only problem now is I can't turn the warning off.

 

[Sous]

I believe my info motors drives is at the top of the post. Finally found a helpful guy at Mercury to tell me how to get into the info on the sensor - it's the pitot sensor. I don't use pitot sensor for anything, GPS feeds the speedometer. Only problem now is I can't turn the warning off.

Yup I get that everytime I start the boat Pitot failure on port and strb. There's gotta be a way to disable it, but I haven't found it. If you do let me know!!