jmauld
Well-Known Member
- Jun 9, 2020
- 2,844
- Boat Info
- 2010 Sundancer 390
2016 Sea Hunt Ultra 211
- Engines
- Twin 8.1l of gas guzzling iron
I have this vesselview on my Sundancer.
https://www.offshoreonly.com/forums...6d1360708031-mercury-vessel-view-img_2723.jpg
I recently swapped over to an axiom and trying to update all of the electronics.
I have a gateway that converts nmea0183 to n2k and back. I know this is working because I am getting a depth reading (nmea0183 transducer) on my axiom and my vesselview. However I can’t get gps to go to the vesselview. I know that the gps data is on the network because I can log into the yacht devices gateway and see it with my iPad.
Alternatively, I also just purchased a mercruiser can-p to nmea2000 gateway and it’s not sending any data across. It is indicating a green light on both LEDs but no data is transferred between my vesselview and the axiom.
at this point I probably should sell this mess and just get an updated vesselview but they are just soo expensive.
https://www.offshoreonly.com/forums...6d1360708031-mercury-vessel-view-img_2723.jpg
I recently swapped over to an axiom and trying to update all of the electronics.
I have a gateway that converts nmea0183 to n2k and back. I know this is working because I am getting a depth reading (nmea0183 transducer) on my axiom and my vesselview. However I can’t get gps to go to the vesselview. I know that the gps data is on the network because I can log into the yacht devices gateway and see it with my iPad.
Alternatively, I also just purchased a mercruiser can-p to nmea2000 gateway and it’s not sending any data across. It is indicating a green light on both LEDs but no data is transferred between my vesselview and the axiom.
at this point I probably should sell this mess and just get an updated vesselview but they are just soo expensive.