1999 340DA. 155hrs on the genset, in otherwise great shape. All of a sudden, dead start circuit. Traced to 8 amp fuse on the control panel. replaced fuse, clicked remote start, no lights nothing, fuse is blown again. Read about issues with the water temp sensor (normally closed) so pulled the two wires on that, hit the switch, nothing blown fuse again. So there has to be a ground fault prior to the water temp switch or it would not have blown the fuse with the wires off as the start circuit was not complete.
Any thoughts on next steps for fault diagnosis
George
Any thoughts on next steps for fault diagnosis
George