Where to find 1990 pushbutton circuit breakers

[Beech2000]

Hi All,
I'm Looking for replacement circuit breakers for my 1990 Searay 350.
They push in to complete circuit and push again to open the circuit.
They all have screw on terminals. I need an assortment of amperage's.
I pulled one of the bad ones out and it says ETA 45-700-IG1-S10.

 

[Lazy Daze]

If it was me, I'd probably call ETA and talk to them directly as to what you would need - and if there are newer/superceded model numbers - and where to purchase. That way you'd have the best shot at getting the right stuff. If not, look for another brand that would fit the hole. Don't worry too much about the screw-on terminal part - you can always just replace the terminal on the wire with a spade if that's how they all come, now.

 

[Beech2000]

Great suggestion. I found some flip toggle ones that might work.

 

[Jeff Delbuono]

Are you talking about this style. I replaced all mine on my 88 s240 sorrento. Just need to figure what size you need for each one you replace

 

[Sublimetime]

I think those type are reset only and you cant turn them off. If his dash is like my 1990 dash, these switches are the only way to turn off certain circuits, such as the bilge lights ,docking lights, and a couple other circuits, so they wouldn't work.

They are perfect for carbon monoxide alarm circuit that you don't want anyone turning off.

 

[Jeff Delbuono]

Ok. These are under all my switches. Just go to wholesale marine or flounder pounder. They have everything

 

[boatmailster]

Small Formula boats use them or try here
https://www.greatlakesskipper.com/boat-parts/electrical-supplies/breakers-push-button

 

[Beech2000]

If it was me, I'd probably call ETA and talk to them directly as to what you would need - and if there are newer/superceded model numbers - and where to purchase. That way you'd have the best shot at getting the right stuff. If not, look for another brand that would fit the hole. Don't worry too much about the screw-on terminal part - you can always just replace the terminal on the wire with a spade if that's how they all come, now.

So I did exactly that. ETA Customer Service Rep gave me the new p/n 2-5700-IG1-K10-DD-15A or -10A or -5A ....... There readily available for about $25 each from Mouser Electric 800-346-6873 (Texas). Thanks for the tip.

 

[Beech2000]

Ok. These are under all my switches. Just go to wholesale marine or flounder pounder. They have everything

Flounder Pounder stocks exact replacements for $18.95 in 5,7,10,15 and 20 amp flavors. Thank you!
https://www.fpmarine.com/Pushbutton...volt-electrical-p/2-5700-ig1-k10-xx-screw.htm

 

[Beech2000]

Small Formula boats use them or try here
https://www.greatlakesskipper.com/boat-parts/electrical-supplies/breakers-push-button

Thanks for the reply. These seem to be reset only. I found exact replacements at FPMarine

 

[Beech2000]

I think those type are reset only and you cant turn them off. If his dash is like my 1990 dash, these switches are the only way to turn off certain circuits, such as the bilge lights ,docking lights, and a couple other circuits, so they wouldn't work.

They are perfect for carbon monoxide alarm circuit that you don't want anyone turning off.

Correct. All the pushbutton 12 volt breakers on my 90 Searay 350 are of the click to shut circuit off style.

 

[Beech2000]

Are you talking about this style. I replaced all mine on my 88 s240 sorrento. Just need to figure what size you need for each one you replaceView attachment 75569

These are reset only. The DC Breakers in my Searay 350 are of the push to open circuit much like a switch.