JeffMac
Member
- Nov 6, 2018
- 41
- Boat Info
- 320 Sundancer, 2004, twin v-drives
- Engines
- 350 Mag 300 hp inboard
Any idea why rpms are surging up and down on one engine without me touching the throttle?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Any idea why rpms are surging up and down on one engine without me touching the throttle?
Any idea why rpms are surging up and down on one engine without me touching the throttle?
Thanks Cliffa. Guess I will do a custom fab as well and share with you guys once complete. My wife loves the paper towel holder.I made the table from a common table and pipe clamps with a PVC pipe leg....
cliff
If it is the IAC the part from amazon is 49$ that fixed my alarm. Item Number Sierra 18-7701 with gasket included. First pic is melted IAC, second is new one installed, third is the alarm code you should be seeing and hearing if your IAC is bad. I also replaced the IAC muffler which is in the throttle body. It is the little sponge in the upper fight corner of pic four. Pic five is the IAC muffler removed. Replaced both IAC mufflers with hopes the IAC on the other motor does not burn out. Did buy an extra IAC which is in the toolbox and ready. Changing the IAC is a 5 min job, the muffler is a solid 10 min per motor. Getting the spark arrestor off takes some wiggling.IAC valve
I think you can add a blue tooth to it. My techy son was going to get me one for Christmas one year, but I opted for something else.Any suggestions for replacement
Clarion XMD-1 stereo ? My stereo place perfect the CD Player plays perfect the remote and the dash works perfectly the XM radio works perfectly. I have the high-tech JL speakers and amp, I’m just missing the Bluetooth option .
I’m torn between the fact that the radio works perfect and sounds great and changing everything just for the Bluetooth any suggestions other than buying a wireless speaker to set on the DasH ?
Yes - same boat/year, but with Bravo 3 drives. To inspect the manifolds/risers, will need to pull a riser (get new gasket first) and inspect. Also, can keep an eye on your psi to see if it starts going up. Pressure going up means pumping against resistance. First place to check is heat exchanger (pull off end caps) then suspect manifolds.
We have had ours for 4 seasons, so it is just time to take a hard look. Didn't get any records of when they were replaced last. I have read that the SS risers are supposed to be good for 20 years. Guess we will see in a month or so.
Are you in the Southern Maryland area? We reside in Leonardtown on Breton Bay. Keep boat at home on covered lift.
See Ray, I would try one of these before upgrading your head-unit.I think you can add a blue tooth to it. My techy son was going to get me one for Christmas one year, but I opted for something else.
the PSI suggestion is great. what should the PSIs be? I'm assuming you mean the water pressure (will have to check with system view sc5000 for this stat but assume it's there).
We keep our boat in our neighborhood marina in Severna Park
Any suggestions for replacement
Clarion XMD-1 stereo ? My stereo place perfect the CD Player plays perfect the remote and the dash works perfectly the XM radio works perfectly. I have the high-tech JL speakers and amp, I’m just missing the Bluetooth option .
I’m torn between the fact that the radio works perfect and sounds great and changing everything just for the Bluetooth any suggestions other than buying a wireless speaker to set on the DasH ?
I used the fusion thing that Kevin is talking about, I had to take the unit out and wire it in the back of the unit. There is an aux but it’s not on front of the unitKevin the clarion XMD-1 does not have Auxiliary IN , RCA cable connectors . I believe they did not offer that until the next model up XMD-2 , they used to make a C bus to RCA adapter, so that way you would unplug the Auxiliary CD player . But I can’t find the plug adapter , I don’t think they make it anymore
Sorry i would have thought they had at least an XMD-3 in a 2006. If you don't have aux-in then you are limited. The only option may be adding something like a tranzit blue to hook up to your antenna. I used one on my 260da that had an CMD unit with out aux-in.Kevin the clarion XMD-1 does not have Auxiliary IN , RCA cable connectors . I believe they did not offer that until the next model up XMD-2 , they used to make a C bus to RCA adapter, so that way you would unplug the Auxiliary CD player . But I can’t find the plug adapter , I don’t think they make it anymore
Thanks Cliffa. Guess I will do a custom fab as well and share with you guys once complete. My wife loves the paper towel holder.
Also, can you send a pic of the underside of your custom table? Interested in what your brackets and support pole look like.