Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Where is it located? We also have a '97... don't necccessarily need it yet though.Does anyone need this panel? Yours for the asking.
thanks. I have the part manual. What I’m looking for is what manufacturer that sea Ray part number relates to. That’s the trick with these manuals - they are all SR part numbers. Unless I go to a marine max, I can’t order with that number.
This is probably a Taylor Made gasket, but im trying to find out which one? A google search of the SR part number only shows other boat parts manuals.
Mine is still good. Did you try calling Taylor Made to see if they have anything similar?So we all have 20 year old(ish) boats and no one has had to replace the rubber gasket on the under side of the bridge hatch? I find that hard to believe. Mine is turning to dust, so I know yours has done the same - or it's doing the same now.
It’s a 1.75” D-shaped foam gasket and I’m sure it was used on many models. I don't need an exact replacement. I'll bet some savvy folks have replaced it with some sort of closed foam gasket from a marine store or a hardware store. Those of you that have replaced it... what did you replace this gasket with?
The pic below shows what I'm looking for:
View attachment 127930
Mine is still good. Did you try calling Taylor Made to see if they have anything similar?
I'd be surprised if you couldn't find something here.So we all have 20 year old(ish) boats and no one has had to replace the rubber gasket on the under side of the bridge hatch? I find that hard to believe. Mine is turning to dust, so I know yours has done the same - or it's doing the same now.
It’s a 1.75” D-shaped foam gasket and I’m sure it was used on many models. I don't need an exact replacement. I'll bet some savvy folks have replaced it with some sort of closed foam gasket from a marine store or a hardware store. Those of you that have replaced it... what did you replace this gasket with?
The pic below shows what I'm looking for:
View attachment 127930
I'd be surprised if you couldn't find something here.
https://www.steelerubber.com/marine/hatch-compartment-seals
That was my other thought that you could put the D gasket on top of some flat gasket sealed together to get the desired/needed height.Surprise! No, seriously, thanks. I hadn't located that site yet. I looked and the closest they have is a 1" wide D. The boat has a 1.75" wide D, but I suppose a 1" may still work...
I did locate a few other candidates: Not D-shaped, but rectangular EPDM foam strips w/ adhesive backing from both McMaster Carr and Grainger. One is 2" x 3/4" and the other is 1.5" x 3/4". I believe the OEM was 7/8" thick, so if 3/4" seems like it wouldn't provide a good seal I can also get a 1-1/2" x 1" from McM Carr. I'll scope it out further in the morning, once I get back to the boat.
Thanks again.
Do you really need a great seal? Mines open 99 percent of the time and when it’s closed all I need the seal for is for a little cushion when it closes so it doesn’t clank fiberglass to fiberglass.Surprise! No, seriously, thanks. I hadn't located that site yet. I looked and the closest they have is a 1" wide D. The boat has a 1.75" wide D, but I suppose a 1" may still work...
I did locate a few other candidates: Not D-shaped, but rectangular EPDM foam strips w/ adhesive backing from both McMaster Carr and Grainger. One is 2" x 3/4" and the other is 1.5" x 3/4". I believe the OEM was 7/8" thick, so if 3/4" seems like it wouldn't provide a good seal I can also get a 1-1/2" x 1" from McM Carr. I'll scope it out further in the morning, once I get back to the boat.
Thanks again.
Do you really need a great seal? Mines open 99 percent of the time and when it’s closed all I need the seal for is for a little cushion when it closes so it doesn’t clank fiberglass to fiberglass.
No, I don’t need a great seal. But when we have the dogs up there we do close it. So we don’t want it rattling. Like you say, we just want enough for a soft cushion - and I want to make sure it’s thick enough to make contact between the surfaces. I doubt they are perfectly square. There are likely tolerance differences across the hatch, so the gasket has to be thick “enough” to account for that. That’s what we will learn in the AM!
I can't wait to get rid of our 400DB.
The seal on our bridge hatch is turning to dust too. Gets black crap everywhere when we open &/or close it.
Definitely need a good seal, ours is closed unless we go up to the bridge to run the boat, morning coffee at PIB &/or KI or the occasional sunset.
If I find a replacement that does what the original was designed to do, I'll share.
Thanks.I'm trying this one: https://www.mcmaster.com/8694K55/
When I went to order on-line, shipping ($21) was 50% the cost of the foam ($42). I called them and placed the order and shipping was 1/3 less ($14). This stuff isn't lightweight at 25' so I'm Ok with that. I should have it tomorrow.
No idea but post in the genneral maintanence section and more eyes will see your question. Likely someone there will have your answer. Enjoy the grand kids!Some how the grand kids got some kind of blue stain from a bathing suit on the dining cushions. Tried soap, simple green, magic eraser’s, and a tiny bit of acetone and no luck. Any suggestions? Thanks, Greg
What brand generator do you have? I have the diesel westerbeke and mine is really an easy job.Generator impeller.
Anyone know best way to get access on the 400? Started on project but gave up. Drain and remove hoses? Move the whole unit?