Mark.60
Well-Known Member
Has anyone removed the hardwood floors in the galley and dinette? It’s time for a facelift and wondering if it’s glued down or screwed down.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Bruce…my Onan is having the same issue, what was your final fix for this. Thanks!Yes.
I'm looking to relocate my rear facing camera to the rear of the canopy on the bridge. Anyone have a camera mounted there? I'm looking for ideas as how they are routing the wires to the arch. PicView attachment 159006 of where i'm looking to mount.
Making a hole in the arch is my issue. The arch has a radius and I haven’t found a wire gland that would sit flush.The lacing for the top is right there and there is space between the outer cover and the inner liner for the wire.
You could zip tie a starboard plate to the lacing and keep it pretty secure.
The radar arch is accessible too but would need a new hole between the inner and outer layers at the aft edge.
Does anyone know the formula to make Noflex digester.
I know it’s been posted just can’t find it.
Welcome! Which Sound are you on?I just closed on my new 44DB WISHBONE III can't wait to get her on the sound .Look forward to communicating with all of you on our progress.
Capt. G.
I think the manual does specify wire gauge. I went with the poco and also wired to 24 volt system so amp draw was much less.I mounted the Seablaze X2 lights this weekend. Any recommendations on wiring them up; wire gauge, switch type, maybe a terminal block to join the light wires together? I’m thinking to put the switch next to the Gen fuel valves and a breaker off the DC EL panel in the salon.
View attachment 159608