Search results

Thank you for the info

hey guys I am in the process of selling my boat, and my agent just called me. He said that he started the generator (I had asked him too), and the sea strainer is leaking out of the cap. I am 150 miles away from the boat at the moment and wont be able to get to it until Friday which is the same...

i have a late 2003 Sundancer 320 with twin bravo 3s Mercury 5.0 MPI engines Saturday morning my father took the boat out and anchored when he went to start the engines the starboard engine fired up fine but the port would not, starter solenoid wouldn't even click. between Saturday afternoon and...

Thanks everyone the info helps a lot!

I'm getting ready to mount a Raymarine Quantum 2 on a 2003 320 sundancer that has not had radar before. On the radar arch there is a flat spot in the center, does anyone know if it is already set to the appropriate degree so the radar is correct when on plane? If I need to add a wedge or washers...

My engines have a plug for a fuel harness I believe that's how they get the fuel smartcraft guages on boats that only have smartcraft and no NMEA. That's also a project for later I'm not 100% sure it will work that way and I may have to go a different way. The reason for the J plugs, NMEA...

Unfortunately everything is analog the only smartcraft in the boat is the harness at the engine.

Hey guys I am getting ready to do a overhaul on my boat and I am hoping someone can confirm that what I am planning will actually work. I am getting ready to put a SmartCraft network in my 2004 Sea Ray Sundancer 320 w/ 5.0 MPI I/O engines so I can get my engine data on my MFDs. I have a...

i got down in the bilge today and I found the plug. thanks!

Thank you for the tip i will take a look next weekend

hi guys last year was my first year with this boat, and I am getting ready to start buying everything i need to get my engine data on my Raymarine Axiom and i have noticed a problem straight from the start. i have a 2004 Sea Ray Sundancer 320 with MerCruiser 5.0 MPI engines and on the port side...