Alright I am going to start from the beginning because I am a total novice and need all the guidance I can get from you wise gentlemen on the forums. I'm gonna swallow my pride and be totally honest with all my boneheaded mistakes.
I live down in San Diego and bought my first boat, a 1993...
I have a 1996 330 Sundancer.
Has anyone with a “SERP” hull id (Florida boat) used Great Lakes Boat Top to replace their canvas? How was the fit? Did you have to get some mods done to fit correctly? Did you replace the pole hardware? And if so how/what was required to make it fit properly?
Will...
Hello,
I recently had an accident with my boat and both the window and the frame are damaged. What's the best way for finding a replacement? Any info is welcome thanks
Well I seem to have an issue. All of my bildge pumps don't turn on. With float switch or the manual switches on the helm. When I turn on the switches the warning buzzer goes off but no activity down below .pumps do not come on ??????. Any ideas out there ? I can not find any in line fuses...
Looking for some help, for some reason, my gauges have stopped working, I've recently installed new digital equipment and when I went to test everything I noticed the speedo gauge and multi-gauge are not working, but the Smart Craft Guage is ok, I've checked the connector at the back of the...
Hello! I’m in need of some advice. I have a 2004 Sea Ray 200 Select with a 5.0 Mercruiser. The factory radio went out so I replaced with a marine Kenwood and went ahead and updated the speakers while I was at it. Everything worked great for about 15 min. Then, the radio shut down and the boat...
I'm now looking for recommendations for a captain to bring a 44 sedan bridge from Baintree MA to Lake Oneida NY my first deal in Long Island fell through and was lucky enough to find another 44 DB on this sites classified any help would be welcomed
I have a 2001 searay 41 ec with cummings I am trying to remove the dripless shaft seal . Is there a specail wrench or socket to remove the coupler nut I have tried every socket I can find its 1 7/8ths but they are so long canot fit between the trans and the coulper John
i am looking for a person to take a 44 DB from Long Island to Schenectady NY then I'll bring her home the rest of the way to Buffalo just can't get the time off to do the whole trip any help would be great canal opens May 21st so looking around that time
Trying to get my 2005 280 Sundancer ready for the slip.. So close! (Twin 305 MerCruisers)
Ran into an issue and need your advice.
Starboard Trim-Tab - Seem to be working correctly
Port Trim-Tab - When you hit the down button you can hear a relay but nothing happens. Up button has no relay...
This is my first post and my first boat, please forgive me if the information I'm asking for is located somewhere on the form.
I just acquired a 1989 230 CC with a 7.4 (454) with a Bravo outdrive.
Things I know about the boat
It has been in storage for the past (5) years
Winterized before...
I have a 2001 Searay 190 Merc 5.0L Alpha One.
Winterized in the fall.... attached a fresh battery this spring. Turn the key...nothing. No accessories or anything. No life on the gauges. I have 12v going to the fuze card under the dash, but when I attach the wiring harness to the card the...
Join our Group on Facebook
Sea Ray Owners
https://www.facebook.com/groups/1385458518308150/?ref=share
Ask questions, get advice and Recommendations, share your pictures, list your boat for sale.
Happy Sea Ray Boating!
⚓️
We are thinking about buying a 2010 Sea Ray 205 SP for $21,000 from a private seller. Here are the specs from the seller . . . https://offerup.co/JwR8nh8OV7
What questions should we ask? Is this a good deal? We are in the Seattle area. Thank you!