Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Post themI did find a few pictures left over on my phone from the water heater repair if you care to see them. I can text or email to you.
I did find a few pictures left over on my phone from the water heater repair if you care to see them. I can text or email to you.
@Jaybeaux I did drain it once and you have no choice but to go over the top... first thing I wondered was why wasn’t it installed at 90deg.
View attachment 102109
You are going to want to measure your own boat...there are ribs under the floor of the hatch.... so placing a new table socket is going to be tricky plus you need a backing plate.... then you have to fill in the old hole.... there is a bit involved in that tooHELP !!!! Trying to avoid a divorce.
Looking to order a replacement table for the cabin, approx the same length but double the width of as our standard SR table. Will be center mounted on a new stand. I'll get rid of the old one and plug the original hole.
Boat is still shrink wrapped so I'm blindly guessing on the dimensions of the OEM table that came with the boat, as well as guessing the distance between the edges of the opposing bench seats. If anyone has a moment and a tape measure, it would be greatly appreciated.
Did I say, HELP?
You are going to want to measure your own boat...there are ribs under the floor of the hatch.... so placing a new table socket is going to be tricky plus you need a backing plate.... then you have to fill in the old hole.... there is a bit involved in that too
Take your time... get on the boat and figure out what you want.
some guys add a second floor socket and have a double pedestal table...that make a big difference in how sturdy it is....something to consider
The OEM table is 37 1/2” x 26 1/4”, still had my old table in my garage. Replaced with teak table from defender.comHELP !!!! Trying to avoid a divorce.
Looking to order a replacement table for the cabin, approx the same length but double the width of as our standard SR table. Will be center mounted on a new stand. I'll get rid of the old one and plug the original hole.
Boat is still shrink wrapped so I'm blindly guessing on the dimensions of the OEM table that came with the boat, as well as guessing the distance between the edges of the opposing bench seats. If anyone has a moment and a tape measure, it would be greatly appreciated.
Did I say, HELP?
Beautiful table but I think he's looking for the cabin table dimensions.The OEM table is 37 1/2” x 26 1/4”, still had my old table in my garage. Replaced with teak table from defender.comView attachment 102174
The measurements were of the table in his photo. I wouldn’t want a bigger table in the salon.Beautiful table but I think he's looking for the cabin table dimensions.
The OEM table is 37 1/2” x 26 1/4”, still had my old table in my garage. Replaced with teak table from defender.comView attachment 102174
Has anyone replaced their freezer (04' 420DA) with the Dometic CRX-1065U/F??
Our freezer is on its last legs, and we'd like to replace it this season, but I'm having trouble finding a suitable replacement. I know in a previous post (pg52) copb8tx replaced his with a Dometic CRX-65 and Flush-Mount Trim kit. However, best as I can tell the CRX-65 is no longer produced. I can still find the fridge from a few suppliers, but the trim kit has eluded my google-fu.
The 1065 appears to be the replacement for the 65, but is slightly larger in all dimensions... thoughts?
Mine was replaced with an Isotherm back in 2017 I think by the PO. It cools to 0* and not turned down all the way. I love it. Very few marine freezers will freeze ice cream hard. I can get the model number later. It looks like it is an exact match to the refrigerator.....
Bennnett
Our fridge was replaced by the previous owner. I can't remember the specific brand, but it's not one I regularly hear. I'd definitely be curious to know the model number, anything helps! I'd like to minimize any cutting. The Admiral like the idea that the dometic could 'switch' between fridge/freezer. I'll go have a look at Isotherm on the web. Thanks!