Need some advice.
2017 350 SLX
Regarding: The Kenyon
grill cavity ‘cut-out’
Had to pull the grill to work on some electric beneath. 4 screws, one in each corner and 1 screw hole appears fine to rescrew, so I need advice on the (3) others.
Hole 1 isn’t even a hole, they completely missed the fiberglass edge and it’s a mere semi circle from the attempted pilot hole. I have some ideas but curious others thoughts. See picture.
Hole 2 is hanging on by a thread before it’s basically similar to hole 1 (not a complete circle) Again needs a new edging. See picture.
Hole 3 just appears the screw is putting on stress and has cracked the gel coat, Still appears strong but I assume it would only get worse, if I do anything is there a ‘best’ approach. No picture.
Thanks CsR
2017 350 SLX
Regarding: The Kenyon
grill cavity ‘cut-out’
Had to pull the grill to work on some electric beneath. 4 screws, one in each corner and 1 screw hole appears fine to rescrew, so I need advice on the (3) others.
Hole 1 isn’t even a hole, they completely missed the fiberglass edge and it’s a mere semi circle from the attempted pilot hole. I have some ideas but curious others thoughts. See picture.
Hole 2 is hanging on by a thread before it’s basically similar to hole 1 (not a complete circle) Again needs a new edging. See picture.
Hole 3 just appears the screw is putting on stress and has cracked the gel coat, Still appears strong but I assume it would only get worse, if I do anything is there a ‘best’ approach. No picture.
Thanks CsR