matthewmiller01
New Member
- May 14, 2008
- 1,007
- Boat Info
- 2008 290 Sundancer
- Engines
- Twin 5.0 MPIs (DTS) w/ Bravo III Drives
Kohler 5 ECD
I currently tie up the boat with 4 lines, one from each corner to a cleat on the dock directly across from each point on the boat. The dock is floating and the boat only moves with wake (usually small as we are off the main channel and my boat is protected by ~4 other docks between it and the main channel). I have never had any problems with my current line setup, but wondered if I should be using spring lines instead.
Your thoughts? Thanks!
Your thoughts? Thanks!