boatrboy
Well-Known Member
I have everything apart and did a number on my hand (raw fiberglass cuts) pulling the radio control box (which looks like a dsm) out to remove all unnecessary items. Plus the control box had the vhf connector in the back and I needed to pull that anyway.The DSM could be behind the dash. On my boat it’s under a cockpit seat but it was installed by the prior owner not Sea Ray.
I have cleaned every inch of the rear cockpit area under the seats so I’m sure it’s not there.
I'm still thinking my boat was not equipped with a dsm. I obviously need to see where the wires on my transducer connect down in the bilge.
I am hoping one of the guys with the same boat and have done this will jump in here.
I just check a manual I found online for the c-80 and it shows the dsm wired to a specific port on the gps which mine was empty. Since I don’t really care about the dsm with a new Garmin gps, I’m still trying to figure out how my vv gets it depth?