sarchila
New Member
- Jun 3, 2013
- 27
- Boat Info
- 2003 Sea Ray 320 Sundancer
2002 Sea Ray 240 Sundancer - SOLD
- Engines
- Twin 6.2L Merc MPI w/ V-Drives
Installed a new LED 32" TV in the 320DA today. Not that bad an install, tricky part was feeding the power cord through bulkhead (drilled 1" hole, don't let wood hole fall behind bulk head) and behind into the AC Panel with an electrical snake. I know there are other threads that have done this, but wanted to add mine to assist anyone that wants to take on this project. I installed a Vizio 32" D-Series TV that has only 100mm x 100mm mount screws. I ordered a flush mount from Amazon to make it extremely close to wall. The mount is made to slide TV from top, however, since there is no head clearance I turned the mount upside down and slid in from bottom, however, this makes the screws tough to get to and tighten so used a very small screw driver and actually bought new longer ones 5mm x 40mm from local hardware store. Be sure to make sure there is enough clearance for the AC/DC Panel door to open. I also bought a new angled TV power cord and cut off the plug end and wired directly to AC outlet breaker and neutral bar by crimping new terminal ends. Good luck to anyone here are some pics of the install.