Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
What are the 2 different fingers for? Different models or all chain, chain/rope?Yes, I have both versions of the finger in stock. Which one do you need? I do not supply any of the hardware. You can get all the original hardware from P2Marine.com
If you only need the finger please go to PayPal, enter my email address and send me $60 which includes tax and shipping.
Best regards,
Michael Dixon
Dixonprecision@gmail.com
The one on the top is for the 2002 model and later progress 1 and some Marlin models. The one on the bottom is pre 2002 progress 1 models.
Yes, how wore is your finger?To pull up my anchor I gotta hold the finger against the rope for it to reel in, I recently replaced the spring and it didn’t fix the problem, would that be because I need to replace the finger ??
To pull up my anchor I gotta hold the finger against the rope for it to reel in, I recently replaced the spring and it didn’t fix the problem, would that be because I need to replace the finger ??
The tension finger is very possibly the problem assuming that you are using at least 5/8 diameter rope. The chain will wear deep groove in the tip of the finger over time . If you have a photo please post it. Take a look at this photo of an old finger next to one of my new replacement fingers.
To pull up my anchor I gotta hold the finger against the rope for it to reel in, I recently replaced the spring and it didn’t fix the problem, would that be because I need to replace the finger ??
Great timing. Just replaced my 9mm spring today on my Progress 1. The old one didn’t look terrible, but I was having trouble with it reeling in rope, particularly at the rope/chain splice. The new spring didn’t fix it. Wondering if I need a new tension finger, too? Hate just replacing parts without some indication that they are the actual problem...
how is the condition of your rope and your splice?
I was forever dealing with the finger not properly gripping the rope and jams at the splice. New spring helped but didn’t completely resolve the issues.
I just replaced my chain and rope with new from AnchorLift. The new rope is 24 plait braid and is machine spliced to the chain. Night and day difference.
Yes, I have both versions of the finger in stock. Which one do you need? I do not supply any of the hardware. You can get all the original hardware from P2Marine.com
If you only need the finger please go to PayPal, enter my email address and send me $60 which includes tax and shipping.
Best regards,
Michael Dixon
Dixonprecision@gmail.com