Grosen
Member
Go with at least the 340 or 370/380. Similar costs of ownership, more space, easier to work on.
I would do a 380 if it was diesels.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Go with at least the 340 or 370/380. Similar costs of ownership, more space, easier to work on.
I see no one likes going down in the engine compartment like meHas anyone recently replaced both raw water intake hoses from seacocks to the strainers? One hose is longer than the other. Do you know what total length is of both hoses? I am trying to order some and I'm not near my boat.
So anyone who has nothing to do, would you mind going downstairs and measuring the two hoses?
The 320 with the 6.2s is a nice boat. More economical to run, good cruising speed and plenty of room (depending on your needs). Good Luck!Yeah I used to have a 32… went to a 40 different brand boat downsizing again due to personal reasons…
Shade sail for cockpit, does anyone have a solution or method they've used? Links to parts they've used? All day sun can get to you.
How about connection mechanisms for poles or existing canopy.
I have a simple setup that works while in the dock. I purchased a 8 x 8 sunshade from Amazon (~$28) , two telescoping tent poles (~$38) , and some ball bungies (see links below). The Telescoping poles go into the fishing rod holders on the gunnel. The shade corner grommets get put on both poles on one end and using the ball bungies (i.e. pushing the bungie cord end thru the grommet) I then put the snap the cord end of the bungie under one of my helm top canvas snaps. It works well. (see pic)
Good Luck,
Mike
View attachment 131231
Shade Address: (https://www.amazon.com/dp/B01N31DCUT?psc=1&ref=ppx_yo2ov_dt_b_product_details)
Telescoping poles (https://www.amazon.com/gp/product/B07PCN4F4N/ref=ppx_yo_dt_b_asin_title_o04_s01?ie=UTF8&psc=1)
Bungie balls address
(https://www.amazon.com/gp/slredirect/picassoRedirect.html/ref=pa_sp_atf_aps_sr_pg1_1?ie=UTF8&adId=A052492420M2KDHQMPAIM&url=/Bungee-Qtimal-Canopy-Extreme-Gazebo/dp/B07CKTQMCL/ref=sr_1_1_sspa?crid=35F4FMKQLEU65&keywords=ball+bungees&qid=1659008731&sprefix=ball+bungees%2Caps%2C77&sr=8-1-spons&psc=1&qualifier=1659008731&id=8683929984446653&widgetName=sp_a
Thank you, I was looking at these very poles and wasnt sure if they would hold up with a big wind, etc. Nothing to hold the canvas on the poles? We've had some really windy days on the barnegate bay earlier.
The poles have a cap on top that holds the sunshade on. I've had it up with strong winds in the dock without a problem. Also, the poles are quite flexible and strong and a snug fit in the rod holder, so they stay put.
Thank you Happy, I may go with this exact setup, did you choose beige color for the a reason? less hot than a blue to match the canvas?in the picture I shared, the caps are not on the poles, but most of the time I use them
Thank you Happy, I may go with this exact setup, did you choose beige color for the a reason? less hot than a blue to match the canvas?
2 more question, did you think of using a water proof material in case of rain? would 8x10 be too big? it seems 8x8 is custom size.I went with beige because it is less hot and also because it is so hard to match blue that I thought I would just stay away from blue
2 more question, did you think of using a water proof material in case of rain? would 8x10 be too big? it seems 8x8 is custom size.
https://www.tecnografic.com/I'm replacing my GPS and I need a new woodgrain panel for the dash where the old GPS was. Does anyone have a good source for this? Size is 10 1/4 X 11 1/4. Thanks.
I'm replacing my GPS and I need a new woodgrain panel for the dash where the old GPS was. Does anyone have a good source for this? Size is 10 1/4 X 11 1/4. Thanks.
Does anyone happen to know the size and correct fit windshield wiper blades for a 2004 320?