Outdrive Trailer Up Switch problem

[Roger Morris]

My trim up/down switches function properly for both outdrives. However, when I use the Trailer Up switch, ONLY the port drive raises up, the starboard drive does not move at all. Any ideas on what the problem might be? Thank you for any advice/help.

 

[Doug Nelson]

Likely just a broken or corroded wire on the switch or bad switch contact. I'm not familiar with your setup but go back to basics check for power before and after the switch if you can. I will need more info to help more.

 

[Roger Morris]

Thanks for the reply, Doug. I will get in there this weekend hopefully to take another look and post more information on what I find. Thank you again.

 

[EddieGuidry30]

Make sure both battery switches are on....I had the same problem with my 2005 sundancer 280Da the starboard would only work when I turned on my second battery switch..

 

[Roger Morris]

Make sure both battery switches are on....I had the same problem with my 2005 sundancer 280Da the starboard would only work when I turned on my second battery switch..

Thanks for that tip...I will confirm that's the case.