Sticky ignition switch

[searsb]

When attempt to start my starboard engine I have to depress and wiggle the button to engage the starter. the first on position is solid but the momentary push is soft and doesn't always make contact. Obviously, the switch is going bad so what do I get to replace it? I have looked online and am confused as to what rocker combination I need . I think the down position should be OFF, the center position should be ON, and the top position should be ON MOMENTARY, correct? I can't seem to find that switch, any suggestion?
Thanks

 

[mquiet]

I have same issue with strbd engine. I left am email for flounder pounder. I will post their reply.


Sent from my iPhone using Tapatalk

 

[Steve Craig]

Bought a complete set of switch covers for mine a couple years back.
Have a look at this site. Pricing was very good.
http://www.oempartsllc.com/switches.aspx

 

[searsb]

I have same issue with strbd engine. I left am email for flounder pounder. I will post their reply.


Sent from my iPhone using Tapatalk

Looked on their site didn't find what I thought I needed, but didn't pursue it. Hope they respond to you. Thanks ahead of time for sharing the reply.

 

[stuartfl]

2005 sea Ray 280 da, my switch part 17 on page 25 of parts manual is bad and I can't find a replacement please help

 

[scoflaw]

The rocker switches in my boat disassemble easily and the contact points can be cleaned.