LUnaCY
Active Member
The table at our rear deck seating is mounted with a straight pole. Since the deck is also slanted back the table is not level. Has anyone bent the pole or made a custom one so the table is level?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Would it be easier to shim the mount under the table on one side to level it?
Yes, that is what I meant. Shim the aluminum mount attached to the table top not the floor mount.I think it was meant to unbolt the table from the mount that's attached on its underside and shim it there. Leave the mount on the floor and the pole as is.
Yes, but there is a smaller pole that supports the table in the lounger position. The angle would stil be off.
Bit in that line...a male/female extension that has an angle would work.