1132MM
Member
- Aug 1, 2010
- 187
- Boat Info
- 2004 Sea Ray 280 Sundancer
- Engines
- Twin 4.3 Liter Mercruiser w/Alpha One Gen 2 Drives
I have a 2004 280 Sundancer with twin 4.3L and Alpha One Gen 2 outdrives. I recently did the bellows and removed the bell housing on the starboard side. I reinstalled the Trim sender and Trim Limit sensors and adjusted them accordingly. Trim up I get the required 20 3/4 inches on the rams but I now get a fault code on the Mercury smart craft gauge and no reading on the trim gauges both digital and standard gauge. The port side works fine with no issues. looking for any suggestions. Thanks