my blue heaven
New Member
- Jun 29, 2022
- 11
- Boat Info
- 2005 Sundancer
- Engines
- 454 Mercruiser
2005 36 Sundance
I'm hoping to get some help! The control cable to my bow thruster failed,
The bow thruster unit is fine, and the control unit is also working; the problem is in the control cable, I ohm out the wires and the connectors. The connectors seem okay.
There are four wires 1234 from the thruster to the control unit, one and four are signal leads control unit ( joystick ) for the left and right control, 2 and 3 are the power leads,
that's what seems to be open, I'm sure there is no fuse protection in between the power leads, other than what's on the thruster itself, which has a 5amp fuse that protects the control unit, and that tested out okay
I would hate having to replace the control cable. Does anyone know what direction
this cable takes before I start undoing the bundles of neatly placed wires by
sea ray
I'm hoping to get some help! The control cable to my bow thruster failed,
The bow thruster unit is fine, and the control unit is also working; the problem is in the control cable, I ohm out the wires and the connectors. The connectors seem okay.
There are four wires 1234 from the thruster to the control unit, one and four are signal leads control unit ( joystick ) for the left and right control, 2 and 3 are the power leads,
that's what seems to be open, I'm sure there is no fuse protection in between the power leads, other than what's on the thruster itself, which has a 5amp fuse that protects the control unit, and that tested out okay
I would hate having to replace the control cable. Does anyone know what direction
this cable takes before I start undoing the bundles of neatly placed wires by
sea ray
Last edited: