Search results

Thank you very much! I did some measurements today of the swim platform to figure out how much the boat will overhang. I have attached a picture of my swim platform with a tape measure across where the center of the keel would be. That measurement was 11' 6" to the edge of the platform where the...

Hello 510 Owners! I have been trying to find information on what size dinghy you put on the back? I had a Zodiac YachtLine 340DL that was 11' in length and it fit very well. I am currently looking at the new Yachtlines (360) and the shortest length is 11' 10". I know it does not seem like a lot...

My old dinghy was a 2000 YachtLine 340DL, I just looked up the specs and it says 11' and when I have the engine as far down as it goes, the skeg is usually right around the outside edge of the swim platform and the bow ends up sticking out a bit too. I guess it can hold a larger boat no problem...

Here is another video that was pretty fun. Just a night anchored out exploring Pooles Island that you are not supposed to go on because the military used it to practice with explosives. https://vimeo.com/622961320?share=copy

Yes, the boat is in Middle River, MD. Lots of great boating destinations on the Chesapeake Bay.

I forgot I posted it! guess I'm just day dreaming. Winter sucks!

Hello, I have a 2000 Sea Ray 510 and looking to upgrade my dinghy. I had a Zodiac YachtLine 340DL that was 10' 8" and that fit very well on the hydraulic swim platform. I really Love the new YachtLines but the smallest they make is 11' 10". is this too large for the boat? Anyone out there with...

This is a video I put together of my Bahamas trip. My girlfriend and I spent 5 weeks cruising around on our Sea Ray 510. It was the best experience of my life. Check out the YouTube Link:

Thank you very much, I gave them a call and need to get pictures to them. Thanks for the help!

Hello, I have 2 engine data displays that have been slowly developing a large dark spot in the middle of them making them very hard to read. does anyone know if this is common? I have a picture of the display attached for reference but not with the current problem. I will add soon. As far as I...

I may have found one issue. Not sure if they are related yet. I found a stuck GFCI in the cockpit. It will not trip and reset. I had that happen with the lights in the v-birth would not go on when the gfci in the head tripped. I will replace the switch and see.

Hello, My 2000 510 has some issues with lighting I can’t figure out. Randomly my galley lights would turn off and the switch would not do anything. Then they would randomly start working again. This is now happening in the Vip guest room. The breaker is not tripping and the fuse in the light...

That is hilarious, thank you! I'll have to take a look at the VHF. She will be the first one to know it works! ;)

Hello I am trying to figure out what a few thing are on my boat. there looks to be a horn/speaker on the hardtop as you can see in the picture attached, It is tan in color. is this standard equipment? how can I use it? there seems to be another VHF radio jack on the cockpit starboard wall that I...

Thank you both, I’m working on it as we speak. I checked the oil level again and it was super low. I fill again using the system and it oozes out the dip stick. Every time I check the level after I fill, it reads full on the top line. Here is what I found out. The oil dip stick has a curve where...

I really have been thinking I did not fill it right as well! The onboard oil system is a little tricky since I don’t know how much I’ve put in. It always seems to settle much lower than it reads. It pumps up the dip stick a lot. Then I have to wait for it to settle. What would happen if I over fill?

From the switch inside the boat. Thank you

Hello Everyone, I have a Westerbeke Diesel 15KW BTDB. I had it running a week ago for a brief period (10 min.) for the first time this summer. I went to check the coolant and oil then mistakenly put a little coolant in the oil fill....I realized the mistake and gave it time to settle and fully...

Hey Chris, I took a quick few pictures of the inside of the enclosure. It has a larger one-piece pipe that secures on each side with 2 upright poles for support. The rest has a plastic track to slide the edges through.

Thank you!! I really have needed some people to reach out to for questions.