My boat began beeping today and that is the error message I got. It said return to port and see dealer. I couldn’t start the boat until I gave it nuetral throttle. It would crank but wouldn’t start without the nuetral throttle. I was able to return just fine but I didn’t go very fast and I’m...
Some of my electronics, like my anchor, aren’t working. I connected the motor to a battery and it worked so the issue isn’t the motor. It’s a 2007 Sea Ray Sundancer 240. I’m thinking of rewiring the entire dashboard, replace all switches, replace the fuse box, put in new wires. The wiring is a...
My bilge began flooding and I realized the engine cooling system was leaking bad. The bilge pump could keep up just enough to pump out what was leaking in. I can’t see the leak. I guess it’s under the engine. Anyway this can be repaired without pulling the engine? I was told my boat has a fresh...
My 2007 Sea Ray Sundancer 240 leaks all the oil in the engine so I put some in before each trip and the boat works fine. Obviously, I prefer to fix it. My mechanic says it is the gaskets that need to be replaced. Is this accurate? He also says he can do it without pulling the engine but it will...
My 2007 Sea Ray Sundancer 240 maxes out at 35 mph; however, it takes about a minute for it to start accelerating even with throttle all the way down. So the boat will cruise at 5-10 mph and then eventually speed up and pretty quickly even though I haven’t touched the throttle for about a minute...
My anchor stopped working. It doesn’t make a sound when I press the button. I assume that I need to replace the motor only? Is there any other trouble shooting that I should do first? Thanks
I have a 2007 Sea Ray Sundancer 240. Bought it used and the seller didn’t have fresh water in the boat during the survey. I now know why. I poured in about 20 gallons and it ended up on my carpet inside the cabin and then my bilge was full of water. Is there a way to repair this? Do I need to...
I bottomed out my 2007 Sea Ray Sundancer 240 and was able to raise my alpha 3 drive but now it won’t lower. My hydraulic fluid leaked into the bilge. I would hear gurgling coming from the bilge when I would try to raise or lower the drive. The fluid all leaked out eventually into the bilge. The...