2004 340 Sundancer Vent Window

Discussion in 'Electrical Stuff' started by ras737, Jul 16, 2018.

  1. ras737

    ras737 New Member

    29
    Feb 7, 2010
    Westerly,RI
    2008 44 Sundancer
    Cummins
    I replaced my actuator but now my window intermittently will not go down. Sometimes it works perfectly and other times I have to hit the close switch numerous times even though I can hear the relay clicking in the EIM unit under the helm. I rechecked all connections and they are fine any suggestions. BTW I never have an issue when opening. Thanks in advance.
     
  2. KevinC

    KevinC Well-Known Member

    Feb 25, 2011
    Long Island, NY
    2004 340 Sundancer
    Twin 8.1 V-drives
    Check the voltage when you are pressing the button. If the voltage is correct then I would look to a intermittent bad ground (or other connection). Not sure of the wiring of these but if voltage is supplied as needed then you can eliminate the switch pad and EIM as being the source.

    Also make sure you did not overtighten anything preventing it from retracting.

    -Kevin
     

Share This Page

Show Sidebar