Stee6043
Well-Known Member
View attachment 102180 View attachment 102181 Yesterday was the day! Let the 2021 season commence.
Looks clean! Very nice. Bet it feels good to be on the water again...
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
View attachment 102180 View attachment 102181 Yesterday was the day! Let the 2021 season commence.
View attachment 102180 View attachment 102181 Yesterday was the day! Let the 2021 season commence.
I have a 2001 410, same configuration, I just bought her in January. Are the carpets still for sale?Bringing back the carpet to the top, finally pulled it out and took some pics. It is brand new, there are a few wrinkles from being rolled up. It is a light gray with just very faint hints of tan but mostly gray light gray. It also had rubber backing
looking for $450 shipped. Pm if interested!
View attachment 101910 View attachment 101911 View attachment 101912
Where did you buy her from?I have a 2001 410, same configuration, I just bought her in January. Are the carpets still for sale?
I had a 410 2001. Sold last year. New owner sold her in January. I have the original carpets still. I put seagrass carpets in. New now old owner pulled those and added teak.I have a 2001 410, same configuration, I just bought her in January. Are the carpets still for sale?
I have a 2001 410, same configuration, I just bought her in January. Are the carpets still for sale?
Yep, according to this they aresounds great and will take them thanks! Do you know if 2001 and 2000 are same configuration?
thanks, I will take themYep, according to this they are
https://www.snapincarpet.com/ecomme...-00-02-.cfm?item_id=108&parent=647&navPanel=1
Finally back from traveling. Prob just going to have to hire a mechanic as I have no time to do things. But another question, anyone replace their fridge on a 400 DA?
Need to replace mine. Sold my Baja yesterday. Sad to see her go. She went to a friend and is already on the water in Sarasota.
Finally back from traveling. Prob just going to have to hire a mechanic as I have no time to do things. But another question, anyone replace their fridge on a 400 DA?
Need to replace mine. Sold my Baja yesterday. Sad to see her go. She went to a friend and is already on the water in Sarasota.
I replaced mine 2 years ago 1998 DA.
Tips: Remove upstairs the dual seat 1st, only 8 nuts hold it on. Lay it back on the un-cushioned rear bench seat. Make sure bolts don't puncture vertical vinyl. Removing this seat ensures no damage and makes for a convenient rest spot for the fridges when moving old and new.
Remove vinyl pads on both sides of the door, you can probably squeeze the fridge in but this ensures no damage. The screws can be located by pinching the vinyl inside and "peeling back". Caulking topside will need to be redone, do not tape it to re-caulk. When you remove the tape, the vinyl may stretch and make a mess.
Remove old from cabinet. The cabinet must be removed to get old out and new in/out the upstairs door. The abridged version is remove microwave, find the all the screws on the right side of cabinet and remove. On the left side, remove the stairs starting with the chrome plate on top and work your way down. Very difficult to find screws under the carpet treads. I ripped it up and replaced.
Move old out and put new in boat. Replace cabinet and slide new in.
While you have the stairs out, consider replacing your sanitation hose to the front head, or at least as far as the coupler.
View attachment 102534
Thank you for the write up, what fridge did you end up getting?[/QUOTE
Norcold DE 0061 was direct replacement for the original one that was in there, DE-461 I think. Seems that Norcold gets a bad rap at times but I wanted something that fit without cabinet mods and that’s all I could find. Also, the original Norcold lasted 20 years and was still cooling when I replaced.
Thank you for your service. A bit chilly in Buffalo December 2017, wasn’t it?
Understand you are going in on the 16th. I put my props back on last week, not going in until 30th. Interested how your work out and new RPM range and speed. Look forward to hearing from you.That's it, forecast in western NY is 40+ for the next 10 days - shrink wrap is coming off tomoow!
I’m excited to test as well. First time pushing the throttles forward will undoubtedly be a pucker moment with all the work I did just hoping to not have any major issues.Understand you are going in on the 16th. I put my props back on last week, not going in until 30th. Interested how your work out and new RPM range and speed. Look forward to hearing from you.
Thanks Turkanon
Awesome! We're scheduled for 4/16 first thing in the morning. Lots of work still to go in the next 2.5 weeks or so...
I’m excited to test as well. First time pushing the throttles forward will undoubtedly be a pucker moment with all the work I did just hoping to not have any major issues.
coolant hoses and clamps, aftercoolers, turbos, props, strut and shaft, intake and breathers, cutless, and dripless seals. Here’s to hoping I didn’t forget a screw
they sure look nice though
View attachment 102651