Strypes
Well-Known Member
- Dec 10, 2015
- 1,283
- Boat Info
- Sea Ray 400 Sedan Bridge
Boston Whaler 235 Conquest
- Engines
- Twin Caterpillar 3116
Mercury Verado 225 4-Stroke
Looking forward to it.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Brilliant! Have you changed the bilge lights to the daylight LED yet? Those plus your mirrors ... great idea!View attachment 117788 View attachment 117787
View attachment 117789
After dropping my cell phone a few times in the bilge a few times I decided to add mirrors to the fuel tanks on the port side. Should have done this a while back. Great idea for changing the impeller and keeping an eye on what’s going on back there.
17" x 12" Self Adhesive Acrylic Mirror Sheet https://www.amazon.com/dp/B095P6P5G...abc_5MCYVSCYDFT8JEMKDWKR?_encoding=UTF8&psc=1
Yup, big difference with those bulbs.Brilliant! Have you changed the bilge lights to the daylight LED yet? Those plus your mirrors ... great idea!
OMG, I LOVE THAT IDEA! Daaa me...View attachment 117788 View attachment 117787
View attachment 117789
After dropping my cell phone in the bilge a few times I decided to add mirrors to the fuel tanks on the port side. Should have done this a while back. Great idea for changing the impeller and keeping an eye on what’s going on back there.
17" x 12" Self Adhesive Acrylic Mirror Sheet https://www.amazon.com/dp/B095P6P5G...abc_5MCYVSCYDFT8JEMKDWKR?_encoding=UTF8&psc=1
Very cool...another project to do!View attachment 117788 View attachment 117787
View attachment 117789
After dropping my cell phone in the bilge a few times I decided to add mirrors to the fuel tanks on the port side. Should have done this a while back. Great idea for changing the impeller and keeping an eye on what’s going on back there.
17" x 12" Self Adhesive Acrylic Mirror Sheet https://www.amazon.com/dp/B095P6P5G...abc_5MCYVSCYDFT8JEMKDWKR?_encoding=UTF8&psc=1
When adding a 12” + 16” Raymarine screen I replaced my mid silver colored forward and port side panels using these guys:Has anyone made a panel for this area of the dash? I'm planning on installing my boost/egt gauges here and may have to do some cutting of that area. Plan is to have it covered with a matching wood grain panel for a cleaner look. Does anyone have a template or measurements of that area? May not get to the boat for a week or so.
View attachment 117967
Is there enough room for this?Has anyone made a panel for this area of the dash? I'm planning on installing my boost/egt gauges here and may have to do some cutting of that area. Plan is to have it covered with a matching wood grain panel for a cleaner look. Does anyone have a template or measurements of that area? May not get to the boat for a week or so.
View attachment 117967
Not a bad option.Is there enough room for this?
https://www.maretron.com/products/dsm410.php
https://www.maretron.com/products/tmp100.php
Yes think of the growth potential, systems monitor, generator monitor, engine monitor, rudder and trim tab position, fluid level monitor, and on and on.Not a bad option.
Is that unit compatible with existing sensors and sending units ?Yes think of the growth potential, systems monitor, generator monitor, engine monitor, rudder and trim tab position, fluid level monitor, and on and on.
I like that... Time to call the plexi glass dealerView attachment 117788 View attachment 117787
View attachment 117789
After dropping my cell phone in the bilge a few times I decided to add mirrors to the fuel tanks on the port side. Should have done this a while back. Great idea for changing the impeller and keeping an eye on what’s going on back there.
17" x 12" Self Adhesive Acrylic Mirror Sheet https://www.amazon.com/dp/B095P6P5G...abc_5MCYVSCYDFT8JEMKDWKR?_encoding=UTF8&psc=1
It can be depending upon which modules you add to the system. With the RIM100 for example you can tie into any power on and off circuit and monitor that status. I completely replaced the SR systems monitor system and am convinced it is far superior; I have a thread on that replacement.Is that unit compatible with existing sensors and sending units ?
Will this display the generator and smartcraft data as well?Is there enough room for this?
https://www.maretron.com/products/dsm410.php
https://www.maretron.com/products/tmp100.php
Is there a way to display my factory trim tab data via nmea or do I need to upgrade the trim tabs to have that featureThis is the NMEA 2000 system I have on my boat; it's quite extensive but you can get the idea of how Maretron integrates. For my boat I get all of the Smartcraft data on the NMEA 2000 network via the Mercury Vesselview 7. Mercury makes Smartcraft to NMEA 2000 converters also if you don't have a VV7. I haven't added EGT yet but it will be a simple addition of the Maretron TMP100 and temp probes into the network. BTW - don't worry about those Maretron NBE100's you won't need them.
View attachment 118013
View attachment 118014
I assume that data is on the Smartcraft network? If so then you can get over to NMEA 2000.Is there a way to display my factory trim tab data via nmea or do I need to upgrade the trim tabs to have that feature