Jaybeaux
Well-Known Member
- Jan 3, 2016
- 2,071
- Boat Info
- 2006 Sea Ray 48
Naught On Call
- Engines
- Cummins QSC-540s with V-Drives
11 KW Onan Genset
Ok 420-ers....I"m at the boat, and my door to the salon started acting up. Actually, its the top piece that you slide back into the dash, so to speak. When pushing it back, it gets hung up a bit after traveling about 12 inches. I can see that the back of it looks as if it is riding high. If I push down on the piece as it disappears into the dash, I can get it to open fully. The same "hang up" happens when closing.
My question is this: The piece in the picture looks as if it is just "caulked" in. If I cut the caulk this panel will lift up, and completely expose the track into which the top slides. Do I have this correct? Has anyone done this?
Thanks in advance.
Jaybeaux
My question is this: The piece in the picture looks as if it is just "caulked" in. If I cut the caulk this panel will lift up, and completely expose the track into which the top slides. Do I have this correct? Has anyone done this?
Thanks in advance.
Jaybeaux