460 DA Owners Thread

Hi all,
Hope you had a good holiday weekend.
Question. port fuel gauge stopped working. The gauge is pinned past the full mark.

Where would you start to troubleshoot? At the gauge or sending unit?
 
Should I be able to view boost pressure coming off the J1939 connection? I'm asking because I have an NMEA2000 converter and see other engine parameters but not boost ....

Thoughts?
 
Joint Custody said:
Hi all,
Hope you had a good holiday weekend.
Question. port fuel gauge stopped working. The gauge is pinned past the full mark.

Where would you start to troubleshoot? At the gauge or sending unit?
Click to expand...
Un-do your dash panel, switch leads between port and starboard fuel gauges. If the port gauge works now (reading the starboard tank) then it is probably your sending unit on the port tank.
 
Jaws said:
Un-do your dash panel, switch leads between port and starboard fuel gauges. If the port gauge works now (reading the starboard tank) then it is probably your sending unit on the port tank.
Click to expand...


Now why didnt I think of that.

Thank you for the idea.
 
TheWolfTC said:
Questions on smaller repairs:
I am currently replacing the Oceanair hatch screen/shade combo. If any of you have done this, let me know if you had issues on finding the correct sizing for replacing. I took it out before, cleaned it, but that didn't help. Just needs to be replaced.

Yes, I replaced mine last year and here is the contact information:
Carmen Bortell
Customer support/Sales
Oceanair Marine Ltd (US)
Direct Dial-802.367.1315
Tel: 802 362 5258
Carmen Bortell
carmenb@oceanairmarine.com

I can send you the exact order conformation if you would like via email so that you have the accurate part numbers to order. I only did the shades and corner pieces. Send me a message and I will attach and reply.[/QUOTE
Click to expand...

An y chance you still have the part number information for our size hatches?
 
Raymond Muller said:
thank you sir!
Click to expand...
Hi Ray,
Here was my order information and their order confirmation.
I also attached the fitting instructions and the order form.

They were really easy to work with and Carmen was my point of contact.
Carmen Bortell
Customer support/Sales
Oceanair Marine Ltd (US)
Direct Dial-802.367.1315
Tel: 802 362 5258

Hope this helps!!
 

Attachments

  • SHADE ORDER.pdf
    649.6 KB · Views: 73
  • Shade_Final_Order.pdf
    23.4 KB · Views: 50
  • RSS - Fitting Instructions.pdf
    791.2 KB · Views: 133
  • RSS ORDER FORM.pdf
    355.2 KB · Views: 68
Last edited:
TheWolfTC said:
Hi Ray,
Here was my order information and their order confirmation.
I also attached the fitting instructions and the order form.

They were really easy to work with and Carmen was my point of contact.
Carmen Bortell
Customer support/Sales
Oceanair Marine Ltd (US)
Direct Dial-802.367.1315
Tel: 802 362 5258

Hope this helps!!
Click to expand...
THANK YOU! APPREICATE THIS VERY MUCH
 
Anyone found an LED replacement to the bulbs in the dash gauges?
 
question for the forum. About a year ago had the boat caulk redone. ( Not sure if that is the cause or not) Shortly after that I have noticed my floor in the cockpit creaks worse and worse. It is in the main path almost at the port step tot he breaker panel. There are no cracks in the fiberglass that I can see but wondering if need to look at caulk or if there is something else to look at. ( I know this is small but always looking for projects :) ) Anyone ran into this or is it just normal?
 
TheWolfTC said:
Hi Ray,
Here was my order information and their order confirmation.
I also attached the fitting instructions and the order form.

They were really easy to work with and Carmen was my point of contact.
Carmen Bortell
Customer support/Sales
Oceanair Marine Ltd (US)
Direct Dial-802.367.1315
Tel: 802 362 5258

Hope this helps!!
Click to expand...
attached is an updated quote if anyone needs.
 

Attachments

  • Est_RM060922_from_AhoyCaptain_14188.pdf
    86.9 KB · Views: 76
TheWolfTC said:
Hi Ray,
Here was my order information and their order confirmation.
I also attached the fitting instructions and the order form.

They were really easy to work with and Carmen was my point of contact.
Carmen Bortell
Customer support/Sales
Oceanair Marine Ltd (US)
Direct Dial-802.367.1315
Tel: 802 362 5258

Hope this helps!!
Click to expand...

Thank you!! I need the screen for the master hatch!
 
At last! We replaced the galley faucet with a "touch" faucet. We will be using it this weekend and I'll post back about it.

I just hated the water running back along the counter from wet hands turning the water off and on.
 

Attachments

  • IMG_3142.jpeg
    IMG_3142.jpeg
    174 KB · Views: 92
Dive Girl said:
At last! We replaced the galley faucet with a "touch" faucet. We will be using it this weekend and I'll post back about it.

I just hated the water running back along the counter from wet hands turning the water off and on.
Click to expand...
Very nice, what brand is it?
 
Hey guys! When I was looking for a 460 last year there was one named Sky Fall listed around the same time. The PO had removed the couch in the guest room and installed a platform bed that doubles as a large storage area. I liked the idea and still do. After getting my small projects behind me I ready to tackle that one. Starting removing the couch yesterday. The mechanical part was easy. But seems the piece in the corner is going to be trouble. I’ll try to post some before and after pics here.
In the meantime, would love to hear any advice or suggestions on the project. Anyone else here done it?
Where’s the best place to get a custom mattress made?
 
You must log in or register to reply here.

Forum statistics

Threads
113,217
Messages
1,428,791
Members
61,114
Latest member
Hercy911
Back
Top