John Leyden
Member
- Jul 7, 2017
- 94
- Boat Info
- Sea Ray 00' 340DA (Anna Mei II)
- Engines
- Was 310 HP MPI --> Twin full 454 Mer-Cruiser 400 hp "Gas Aspirated" Less to worry! Works for me!
Problem is on my 00' 340 SD and that I'm Running a Xantex 3012 to run off of two big AGM Batteries and "Part of this (AC) setup is working"!
And "I do get AC to the Main Boat Panel" ----- But NONE to the "DC side of the Main Panel"
Part of this I don't understand in that ----This Xantex when its turned on is Charging both the AGM Batteries.
So why is it that Its not routing the DC to the Main Panel?
Some Info: The input to the Xantex 3012 is from either from "Shore Power" and or a "6000Watt portable" unit and both have given the same results. (NO DC to Main Panel)
I'm going to Check the other Electric Panel near the Engine Bulk head and see if I can check the lines out going from the main Panel there with a Fluke Network Probe!
In that maybe there's a SHORT there or maybe a wire that gone bad ?
Note: Any Help or Anything would be nice! Maybe send an Seeing Eye Dog to help!
Thks. 5622606525 Or JonLeyden@Yahoo.com
And "I do get AC to the Main Boat Panel" ----- But NONE to the "DC side of the Main Panel"
Part of this I don't understand in that ----This Xantex when its turned on is Charging both the AGM Batteries.
So why is it that Its not routing the DC to the Main Panel?
Some Info: The input to the Xantex 3012 is from either from "Shore Power" and or a "6000Watt portable" unit and both have given the same results. (NO DC to Main Panel)
I'm going to Check the other Electric Panel near the Engine Bulk head and see if I can check the lines out going from the main Panel there with a Fluke Network Probe!
In that maybe there's a SHORT there or maybe a wire that gone bad ?
Note: Any Help or Anything would be nice! Maybe send an Seeing Eye Dog to help!
Thks. 5622606525 Or JonLeyden@Yahoo.com